FSM Face Seal – Metal-Reinforced High-Pressure Static Seal for Flanges and End Covers.
Metal-reinforced FSM face seal for high-pressure flanges and end covers. Static axial sealing, drop-in cartridge, extrusion-resistant. NBR/FKM + steel, –30°C~120°C, ≤50 MPa.
FSM Face Seal – A heavy-duty metal-reinforced static face seal engineered for high-pressure flange, end-cover, and manifold sealing applications. This cartridge-style face seal features a precision-elastomeric sealing element bonded to or retained by a rigid metal carrier, providing uniform compression and leak-tight closure under extreme pressures and thermal cycling. The integral metal reinforcement prevents over-compression, resists extrusion, and ensures stable groove retention even under pressure spikes and vibration. The drop-in cartridge design simplifies installation and replacement without special tooling or adhesives. Excellent compatibility with hydraulic oils, lubricants, water, air, and aggressive media makes this high-performance static seal ideal for pump housings, valve bodies, manifolds, motor flanges, and heavy-duty end covers. Material: NBR/FKM elastomer with galvanized or stainless steel insert. Temp: –30°C to +120°C. Pressure: up to 50 MPa.
Metal-reinforced static face seal for high-pressure flange and end-cover applications
Integral steel carrier prevents over-compression, resists extrusion, and ensures stable retention
Precision elastomeric sealing element delivers uniform compression and leak-tight sealing
Drop-in cartridge design simplifies installation without special tooling or adhesives
Excellent media compatibility with hydraulic oils, lubricants, water, air, and aggressive fluids
High-pressure capability up to 50 MPa; wide temperature range –30°C to +120°C
Ideal for pump housings, valve bodies, manifolds, motor flanges, and heavy-duty end covers
FSM Face Seal – Metal-reinforced high-pressure static face seal for flanges and end covers. Cartridge-style design delivers uniform compression, extrusion resistance, and leak-tight sealing. Drop-in installation. NBR/FKM + steel insert. –30°C~120°C, ≤50 MPa.
Original text from: Hydraulic and Pneumatic Seals https://www.bszzseal.com/
